Password must contain at least 1 special character and must not contain a space or any of the following characters: >, <, &, ; or “
Password must contain at least 1 numeric character
Password must contain at least 1 lower case alphabetic character
Password must contain at least 1 upper case alphabetic character
Password must not match or contain your user ID
Password must not contain your first name or last name
Password must be between 8 and 16 characters long
Password must not be one of 24 previous passwords
Password must not contain more than 4 identical characters
Password must not contain any restricted words (Louisville, UofL, Cards, Cardinals, L1C4, nono1, nono2, 2014, 2015, 2016, 2017, 2018, 2019, 2020, l1c4, password, spring, summer, fall, winter, January, February, March, April, May, June, July, August, September, October, November, December, guest, letmein, football, baseball, basketball, soccer, softball)
Before changing your password, shut off all of your mobile devices. (Smartphone, tablet, e-book reader, etc.)
Close the Outlook email program on the computer you're using to change your password
Please change your password. Wait about 15 minutes for the change to take effect. Follow the appropriate steps below for your computer:
Follow the steps below for your particular scenario.
Please follow the steps outlined in this article to synchronize new password with the encryption login: Encryption Only Accepts Old Password.
Log off your computer.
Log in by typing AD\ followed by your ULink userID (AD\userID) and your new ULink password.
Open Outlook and log in with your new password.
Check the box next to Remember my Credentials if not on a public computer.
If prompted with an M+ or NetMail Archive login window, type your username as ad\userID, and then your new password.
Please ask your unit's Tier I technical support personnel to remove any stored credentials from your computer. Other saved passwords can and will lock your AD account.
Log off your computer.
Log in by typing AD\ followed by your ULink userID (AD\userID) and your new ULink password.
Disconnect from your current wireless network, and then reconnect to ULSecure using your new password. (Follow these steps).
Open Outlook and log in with your new password.
If prompted with an M+ or NetMail Archive login window, type your username as ad\userID, and then your new password.
Log off your computer.
Log in by typing AD\ followed by your ULink userID (AD\userID) and your new ULink password.
Disconnect from your current wireless network, and then reconnect to ULSecure using your new password. (Follow the steps).
The ULSECURE wireless network will prompt you to log in with your new password.
Open Outlook and log in with your new password.
Disconnect from your current wireless network, and then reconnect to ULSecure using your new password. (Follow the steps).
Your wireless device will prompt you to log in to the ULSECURE wireless network.
Open your Email app, tap the refresh/sync button and enter your new password.