Eduroam Onboarding (SecureW2) – iOS (iPhone / iPad/ iPod)
Step 1
Press the Menu button to open the device’s home screen and select Settings, then select WiFi. Make sure the WiFi button is set to “ON”.
Select ulvisitor from the list of available wireless networks. Enter email and click accept to get fully connected to ulvisitor
Step 2
Open a Browser and go to http://uofl.edu/setupwireless
You should see a screen with your operating system already chosen. If not, please select your operating system from the drop-down menu next to “Select your device“.
Click Sign In
Step 3
At the Microsoft login screen enter your UlinkID@louisville.edu and password.
Step 4
Click No on the Stay Signed In screen
Step 5
You should see a screen with your Operating System already chosen. If not then please use the drop- down menu by “Select your device:“.
Click “JoinNow“.
Step 6
Download eduroam certificate. Select Install.
If you are using the lastest version of iOS then you will be prompted to download the profile.
Select
Allow and Close on the popups.
Step 7
To install the profile you downloaded please go to the Settings App. Click on Profile Downloaded
Step 8
Root Certificate Installation Warning: Select Install.
Step 9
If you are prompted please enter your pass code for your device.
Step 10
Click the “Install” button
Step 11
After the eduroam wireless profile is installed. Select Done.
Note: eduroam Certificate will be stored in Settings, under General —-> Profile.
After the certificate is installed, use these instructions to join the eduroam wireless network:
Join Network
Select Wireless and then choose eduroam from the available wireless networks list. Once connected to Eduroam, press the home button to return to the home screen.