Eduroam Onboarding (SecureW2) – iOS (iPhone / iPad/ iPod)

Owned by Chris Weaver
Last updated: Jun 08, 2022
3 min read

Step 1

Press the Menu button to open the device’s home screen and select Settings, then select WiFi. Make sure the WiFi button is set to “ON”.

Select ulvisitor from the list of available wireless networks.  Enter email and click accept to get fully connected to ulvisitor 

 Step 2

Open a Browser and go to University of Louisville-uofl_eduroam | Powered by SecureW2

You should see a screen with your operating system already chosen. If not, please select your operating system from the drop-down menu next to “Select your device“.

Click Sign In

Step 3

At the Microsoft login screen enter your UlinkID@louisville.edu and password.

Step 4

Click No on the Stay Signed In screen

Step 5

 You should see a screen with your Operating System already chosen. If not then please use the drop- down menu by “Select your device:“.

Click “JoinNow“.

Step 6

Download eduroam certificate. Select Install.

If you are using the lastest version of iOS then you will be prompted to download the profile.

  • Select 

Allow and Close on the popups.


Step 7

To install the profile you downloaded please go to the Settings App. Click on Profile Downloaded


Step 8

Root Certificate Installation Warning: Select Install.

Step 9

If you are prompted please enter your pass code for your device.

Step 10

Click the “Install” button

Step 11

After the eduroam wireless profile is installed. Select Done.



Note: eduroam Certificate will be stored in Settings, under General —-> Profile.

After the certificate is installed, use these instructions to join the eduroam wireless network:

 Join Network

Select Wireless and then choose eduroam from the available wireless networks list. Once connected to Eduroam, press the home button to return to the home screen.